3com 3CRUS2475 Manuale Utente
mac access-list
47
Default Configuration
This command has no default configuration
Command Mode
IP-Access List Configuration mode
User Guidelines
Use the ip access-list Global Configuration mode command to enable
the IP-Access List Configuration mode.
the IP-Access List Configuration mode.
Before an Access Control Element (ACE) is added to an ACL, all packets
are permitted. After an ACE is added, an implied deny-any-any
condition exists at the end of the list and those packets that do not match
the defined conditions are denied.
are permitted. After an ACE is added, an implied deny-any-any
condition exists at the end of the list and those packets that do not match
the defined conditions are denied.
Example
The following example shows how to define a permit statement for an IP
ACL.
ACL.
mac access-list
The mac access-list Global Configuration mode command enables the
MAC-Access List Configuration mode and creates Layer 2 ACLs. To delete
an ACL, use the no form of this command.
MAC-Access List Configuration mode and creates Layer 2 ACLs. To delete
an ACL, use the no form of this command.
Syntax
mac access-list name
no mac access-list name
Parameters
■
name — Specifies the name of the ACL. (Range: 0-32 characters)
Default Configuration
The default for all ACLs is deny all.
Command Mode
Global Configuration mode
Console(config)# ip access-list ip-acl1
Console(config-ip-al)# deny rsvp 192.1.1.1 0.0.0.255 any