3com 3CRUS2475 Manuale Utente
set interface active
85
Example
In the following example, the counters for interface 1 are cleared.
set interface active
The set interface active Privileged EXEC mode command reactivates an
interface that was shutdown.
interface that was shutdown.
Syntax
set interface active {ethernet interface | port-channel
port-channel-number}
port-channel-number}
Parameters
■
interface — Valid Ethernet port. Elana
■
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command is used to activate interfaces that were configured to be
active, but were shutdown by the system for some reason (e.g., port
security).
active, but were shutdown by the system for some reason (e.g., port
security).
Example
The following example reactivates interface 1.
show interfaces
advertise
advertise
The show interfaces advertise Privileged EXEC mode command
displays auto-negotiation data.
displays auto-negotiation data.
Console# clear counters ethernet g2
Console# set interface active ethernet g1