Axor 16510XX1 Istruzioni Di Montaggio

Thread the friction washers, metal washers and

mounting nuts to the valve shanks.

Tighten the mounting nuts by hand. Tighten the

tensioning screws.

Install the spout, slide bushing and o-ring. Make

sure that the slide bushing is oriented correctly.

Tighten the set screw.

Lightly coat the handle o-rings with the en-

closed lubricant.

Install the index caps on the hot and cold

handles and pull rod assembly.

16510XX1 only: Install the pop-up drain.

Caution: the hot water

riser may be hot!