Axor 06697XX0 Manuale Utente

3

For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-

sional plumber.
Please read over these instructions thoroughly before beginning installation.  Make sure 

that you have all tools and supplies needed to complete the installation.
The supply hoses for this faucet require 3/8” compression fittings (included).
Protection against backflow provided by check valve.

•

•

•
•

Snap the gooseneck spout into place on the faucet 

body.
Place the sealing ring and faucet on the mounting 

surface.
Install the plastic washer, fiber washer, friction 

washer and mounting nut.  

The plastic washer may be omitted if there 

is insufficient space, or if the countertop is 

thicker than 1 3/8”.

Tighten the mounting nut and tensioning screws.

plastic washer

sealing ring

fiber washer

friction washer

mounting nut

tensioning screw