Axor Showerpanel Manuale Utente

This unit can be installed on a flat wall or in a 90

o

 corner.  Instructions for installation on a 

flat wall begin on page 5.  Go to page 8 if the panel is to be installed in a corner.  

Stub out 1/2" NPT male nipples for the hot and cold water supplies at the locations shown 

on the appropriate rough-in diagram.  The nipples should extend 5/8" outside the surface 

of the finished wall. 

Install the wall surface and make the wall watertight before installing the panel.  The panel 

hangs on the finished wall.  Seal the wall around the nipples with waterproof sealant. 

4