Axor 04126XX0 Manuale Utente
4
Technical Information
Recommended water pressure
45 - 72 psi
Recommended hot water temp.
120� - 140� F*
Max. hot water temp
165�F*
Max. flow rate
8 gpm
Max. flow rate – handshower
2.5 gpm
Safety stop
100° F
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater.
Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly before beginning installation. Make sure
Please read over these instructions thoroughly before beginning installation. Make sure
that you have all tools and supplies needed to complete the installation.
The mounting surface must be installed and made watertight prior to installation.
The rough must be installed prior to installation of this trim kit.
Some areas have plumbing codes limiting the maximum output temperature. The high
The mounting surface must be installed and made watertight prior to installation.
The rough must be installed prior to installation of this trim kit.
Some areas have plumbing codes limiting the maximum output temperature. The high
temperature limit stop may be reset to comply with these codes.
•
•
•
•
•
•
•
04130XX0
04134XX0
04131XX0