Tascam DA-302 Manuale Utente

0

Shows the indication for the deck selected by the
SELECT 1/2 key.

Lights when the Start ID Manual Writing mode is
selected. 

Lights when Start ID erasing is selected.

Lights when Skip ID writing is selected.

Lights when Skip ID erasing is selected.

Lights when End ID writing is selected.

Lights when renumbering is selected.

Lights when the Start ID is detected.

Lights when the Skip ID is detected.

Lights when the End ID is detected.

q

… When an analog signal is being recorded, the sam-

pling frequency (48.0k, 44.1k, 32.0k) selected by
the Fs switch is lit.

… When a digital signal is being recorded, the sam-

pling frequency (48.0k, 44.1k, 32.0k) of the input
signal is lit.
·When "DIGITAL" is selected with the INPUT

switch and recording is performed without dig-
ital signal input, 48.0k blinks.

… LP lights in the Long Play mode.

w

… Shows the input signal level during

recording/record-pause/sampling monitor.

… The playback signal level is shown during play-

back.

… When the input or playback signal level surpasses

the full-scale level, the OVER section lights.

e

Lights when the ABS time is shown on the time
display.

Lights when the PGM time is shown on the time
display.

Lights when the REMAIN time is shown on the
time display.

r

Shows the indication for the deck selected by the
SELECT 1/2 key.

Lights in the One-Program Repeat mode.

Lights in the All-Program Repeat mode.

8

Select to engage both Deck 1 and Deck 2 in the
Record or Play mode at the same time.

Continuous playback or recording on Deck 1 and
Deck 2.

For independent operation of Deck 1 and Deck 2.

9

… When recording analog input signals, select the

sampling frequency (32k, 44.1k, 48k).  
·When 32k is selected, the Long Play mode is

engaged.

·When recording digital input signals, the sam-

pling frequency is automatically determined
according to the input signals.

0

… Resets the margin value when pressed while the

margin value is shown in the program number/mar-
gin display.
·When holding this key pressed, the margin value

corresponding to each input signal is shown con-
tinuously.

… Shows the margin value for as long as it is pressed,

when pressed while the program number is shown
in the program number/margin display during play-
back.

q

Use to adjust the recording level.

w

To select the control deck for Deck 1 and Deck 2 (ID
MODE key, EXECUTE key). 
When setting the menu, use to select the deck as
required.

e

Set this switch when input signals are analog.

To adjust the recording level with the INPUT level
controls.

The input and output levels are fixed and the record-
ing level cannot be adjusted.
·For the specified input level, the level meter shows

-16 dB.

r

Set this switch according to input signals.

Select when input signals are analog.

Select when input signals are digital.