Tascam DA-302 Manuale Utente

Set the COMMON MODE switch to OFF.

Press the PLAY key to start playback.

… When the REW key (F FWD key) is pressed during

playback, 2 times (3 times) normal speed rewind cueing
(fast-forward cueing) is performed.  Pressing it once
more allows 4 times (6 times) normal speed cueing.
Pressing it once more restores 2 times (3 times) cueing.
To restore normal playback, press the PLAY key.

… Holding the REW key (F FWD key) pressed for 1 sec-

ond or more during playback performs 2 times (3 times)
normal speed rewind (fast forward) cueing for as long as
the key is pressed.  Releasing it restores normal play-
back.

… Pressing the REW key during fast-forward cueing

switches to 2 times normal speed rewind cueing.

… Pressing the F FWD key during rewind cueing switches

to 3 times normal speed fast-forward cueing .

… Playback signals are output from the ANALOG OUT

and DIGITAL OUT connectors of Deck 1 (Deck 2).

With continuous playback, the tapes in Deck 1 and Deck
2 are played back continuously. 

Set the COMMON MODE switch to "1 

> 2".

Set "Seqtime" in the menu. (

úp.28)

Press the PLAY key on Deck 1 to start playback.
When the ABS time of Deck 1 reaches the time set
with "Seqtime", Deck 2 starts playback automatically.

Deck 1 automatically rewinds the tape to the beginning
either 3 minutes after the time set with "Seqtime" or
when the tape end is reached.

Deck 2 automatically rewinds the tape to the beginning
either 3 minutes after the time set with "Seqtime" or
when the tape end is reached.

… The playback signals are output from the ANALOG

OUT and DIGITAL OUT connectors of Deck 1 
(Deck 2).

When a Skip ID is detected during playback, the tape is
fast-forwarded to the next Start ID and resumes playback.

Select the deck with the SELECT 1/2 key.

Press the MENU key to show the following menu in
the time display.

Skip1  Off

Set to "On" with the UP/DOWN key to engage the
Skip Play mode.

… If the STANDBY key is set to ON, the Play-Pause mode

is engaged at the Start ID.

When a Start ID is detected during playback, this function
automatically engages the Play-Pause mode.

Select the deck with the SELECT 1/2 key.

Press the MENU key to show the following message in
the time display.

Single1  Off

Set to On" with the UP/DOWN key to engage the
Single Play mode.

… The playback sound can also be monitored through the

ANALOG CASCADE OUTPUT connectors.  When
"Cas Out" is set to "Auto" in the menu (

úp.28), play-

back sound output is switched from Deck 1 to Deck 2 at
the time Deck 2 starts playback.  In this status, if the
PLAY key of Deck 1 is pressed, you can monitor the
playback sound of Deck 1 again.