Tascam DA-302 Manuale Utente

… Do not operate this deck when the temperature is out-

side the operating range of 5˚C to 35˚C.  To prevent
malfunctions, do not install this deck anywhere where
it could be exposed to dust or subject to high humidity.

… Do not apply excessive force.  This could damage the

internal circuitry or the cabinet.

… Use a soft cloth (such as a silicone cloth) to clean the

cabinet.  If the unit is very dirty, wipe the dirt off with
a cloth dipped in diluted detergent.  Do not use solvents
such as thinner and benzine as these can melt plastic or
coated surfaces and fade characters inscribed on the
panel.

… Because of improvements in design and specifications,

the product shown in illustrations in this manual may
differ from the actual product.

This deck consists of the following.

1. DA-302 main unit
2. Accessories

Mount screw kit
RC-D302 remote control unit
Owner's manual

AUTO ID mode, AUTO ID detection level, memo point
and menu setting data are all retained in the DA-302’s
internal memory even when the power is turned off.

When you move the deck from a cold place to a warm
place or use it after a sudden temperature change, conden-
sation may occur.  If this happens, leave the power on, but
do not operate the deck. After one or two hours, turn the
power off and then on again.

Install this deck with the provided mount screw kit as
illustrated.

When mounting this deck in a rack, do not reinstall the
mount screws after removing the deck’s feet or you may
damage PCBs or other internal components. Handle the
removed feet carefully.

CAUTION :
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRO-
DUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA
PRISE ET POUSSER JUSQU' AU FOND.

For CANADA