Aiko CTH3-150 Manuale Utente

12 of 71

To ensure your safety, and comply with the terms of 
the warranty, all units must be installed in 
accordance with these instructions.

The gas or the electrical supply lines must not be 
used to support the heater.

Do not locate the gas or electric supply lines directly 
over the path of the flue products from the heater.

The heater must be installed in a location that it is 
readily accessible for servicing.

The heater must be installed in accordance with 
clearances to combustibles as indicated on the 
heater and in this instruction manual.

The gas inlet pressure must be maintained as 
indicated on the rating plate.

Typical installation configurations are shown 

13, Figure 14.

Expansion and contraction of the tube dictates that 
the minimum suspension lengths in the table 

Page 13, Figure 14 be maintained.