Mitsubishi Electronics SW1DNC-GXW2-E Manuale Utente
3 - 48
3.7.5 Printing a PLC Parameter
3 CREATING PROGRAM IN STRUCTURED LADDER/FBD LANGUAGE
GX Works2
3.9
Exiting GX Works2
End the project.
1.
Select [Project]
[Exit (Q)].
2.
Click the
button to exit GX Works2.
If you have not saved the project, the following message appears.
Click the
Click the
button to save the project.
Click the
button to exit GX Works2 without saving the project.