StorageTek 6 Manuale Utente

1st ed., 6/30/04 - 312579601

range specifies the volume serial numbers which the subpool represents. Range start 
and end values are separated by a single dash (-). Multiple ranges may be specified 
separating each range by commas. 

Notes:  

 1. The range of volume serial numbers must be unique for each subpool; that is, a 

volume serial number cannot be used in more than one subpool range. 

 2. Make sure when you are coding multiple ranges of tapes that you do not specify 

the RANGE parameter on different SCRPOol control statements. If more than 
one SCRPOol statement has been specified, the HSC reads only the last 
RANGE setting it encounters and loads only that range. All other ranges are 
ignored. 

StorageTek recommends that you specify multiple ranges, separated by 
commas, on one SCRPOol control statement if possible. 

type specifies the label type associated with the applicable subpool. Types include:

standard label 

no label 

ANSI label 

nonstandard label 

optionally, defines the hosts that are valid for this subpool. Multiple host-lists may be 
specified, separating each host-list value with a comma. Default HOSTID is ALL. If 
you need to define the same subpool name on some but not all hosts, you may 
duplicate the SCRPOol statement changing the HOSTID parameter as necessary (see 
examples). Optionally, you may use separate PARMLIB data sets for each host, but 
this is not recommended.