Yamaha HTR-6180 Manuale Utente

• This unit does not convert 480 line video signals and 576 line 

video signals interchangeably.

• The analog component video signals with 480i (NTSC)/576i 

(PAL) of resolution are converted into the S-video or composite 
video signals and output at the S VIDEO MONITOR OUT and 
VIDEO MONITOR OUT jacks.

• The converted video signals are only output at the MONITOR 

OUT jacks. When recording a video source, you must make the 
same type of video connections between each component.

• When composite video or S-video signals from a VCR are 

converted into component video signals, the picture quality may 
suffer depending on your VCR.

• Unconventional signals input at the composite video or S-video 

jacks cannot be converted or may be output abnormally. In such 
cases, set “VIDEO CONV.” to “OFF”.

HDMI RES.

Use this feature to activate or deactivate the HDMI up-
scaling of the analog video signals input at the VIDEO, S 
VIDEO and COMPONENT VIDEO jacks so that the up-
scaled video signals are output at the HDMI OUT jack.
This unit up-scales the video signals as follows:
• 480i (NTSC)/576i (PAL) 

→ 480p/576p, 1080i, 720p, 

or 1080p

• 480p/576p 

→ 1080i, 720p, or 1080p

• This unit does not up-scale the analog component video signals 

with 720p or 1080i of resolution.

• The “HDMI RES.” parameter appears only when you set 

“VIDEO CONV.” to “ON”.

• If you connect your video monitor via HDMI connection, this 

unit automatically detects the available video signal resolution 
of the video monitor, and an asterisk (*) appears on the left of 
the available video signal resolution(s).

• If this unit cannot detect the available video signal resolution(s) 

of the connected video monitor, set “MON. CHK” (see 
page 112) to “SKIP” and then set “HDMI RES.” again.

• This unit does not convert between 480 line video signals and 

576 line video signals.

HDMI ASPECT

Use this feature to select the adjustment of aspect ratio for 
analog video signals output at the HDMI OUT jack.

• When “HDMI RES.” is set to “THROUGH”, you cannot make 

any adjustments to “HDMI ASPECT”.

• If the aspect ratio of the input video source is other than 4:3, this 

unit automatically ignores the setting of “HDMI ASPECT”.

• When “HDMI ASPECT” is set to “SMART”, the video images 

of the edge of the video monitor are rather stretched.

• When the video signals are input at HDMI IN jacks or the 

signals are input with 720p, 1080i or 1080p of resolution, the 
setting of “HDMI ASPECT” does not affect the video signals 
output at the HDMI OUT jack.

Does not up-scale any analog video signals.

480p (or 576p), 
1080i, 720p, 
1080p

Up-scales analog video signals to 480p or 576p, 
1080i, 720p, or 1080p of resolution.

[

p]/[[]:

[ENTER]:

B)VIDEO SET

HDMI RESOLUTION

>*THROUGH

* 480p

* 720p

*1080i

*1080p

Select

Enter

Does not make any adjustments to the aspect 
ratio for the HDMI video signal sources.

16:9

Displays video images with the aspect ratio of 
4:3 on your video monitor with the aspect ratio 
of 16:9. Black stripes appear on the right and left 
sides as a result.

SMART

Fits video images with the aspect ratio of 4:3 to 
your video monitor with the aspect ratio of 16:9.

[

p]/[[]:

[ENTER]:

B)VIDEO SET

VIDEO CONV.;;;;;;ON

HDMI RES.;;;;*1080p

HDMI ASPECT;;;THRGH

Up/Down

Select

.