Yamaha RX-V3800 Manuale Utente

A

MASTER ON/OFF

C

INPUT

y
• The recommended sound field program is set for each 

input source (DVD, etc.). You can also use various sound 
field programs and other sound modes for playback. Refer 
to the following pages for details:

– see pages 50 and 71 to use various sound field 

programs

– see page 50 to turn on or off the sound effect
– see page 51 to use the pure direct mode for high 

fidelity sound

• You can also set the input source to “TUNER” to use the 

FM/AM tuning feature. For information on the FM/AM 
tuning, see pages 53 to 55.

R

VOLUME

■

B

MAIN ZONE ON/OFF

This unit is set to the standby mode and consumes a small 
amount of power in order to receive infrared signals from 
the remote control. To turn on this unit from the standby 
mode, press B

 on the front panel 

(or 9

 on the remote control). See page 33 for 

details.

If the speakers are 6-ohm speakers, set “SPEAKER 
IMP.” to “6

Ω

 MIN” before using this unit (see 

page 122). You can also use 4-ohm speakers as the 
front speakers (see page 33).