Yamaha RX-V3800 Manuale Utente
54
En
FM/AM tuning
You can use the automatic preset tuning feature to store up
to 40 FM stations with strong signals (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups) in
order. You can then recall any preset station easily by
selecting the preset station number.
to 40 FM stations with strong signals (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups) in
order. You can then recall any preset station easily by
selecting the preset station number.
1
Rotate the
C
INPUT
selector on the front
panel to select “TUNER” as the input source.
2
Press
J
FM/AM
to select “FM” as the
reception band.
“FM” appears in the front panel display.
3
Press and hold
K
MEMORY
for more than 3
seconds.
The preset station number as well as the AUTO and
MEMORY indicators flashes. After approximately 10
seconds, automatic presetting starts from the current
frequency and proceeds toward higher frequencies.
MEMORY indicators flashes. After approximately 10
seconds, automatic presetting starts from the current
frequency and proceeds toward higher frequencies.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
panel display shows the frequency of the last preset
station.
y
• You can specify the preset number from which this unit
• You can specify the preset number from which this unit
stores FM stations. Press G
A/B/C/D/E
and then
H
PRESET/TUNING/CH
l / h repeatedly after you
perform step 3 to select the preset station number under
which the first station will be stored.
which the first station will be stored.
• You can begin tuning toward lower frequencies to store FM
stations automatically. Press I
PRESET/TUNING
so that
the colon (:) disappears from the front panel display and
then press H
then press H
PRESET/TUNING/CH
l after pressing and
holding K
MEMORY
for more than 3 seconds.
• Any stored station data existing under a preset station
number is cleared when you store a new station under the
same preset station number.
same preset station number.
• If the number of received stations does not reach 40 (E8),
automatic preset tuning automatically stops after
searching for all the available stations.
searching for all the available stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station
you want to store is weak in signal strength, tune into it
manually and store it as described in “Manual preset
tuning”.
you want to store is weak in signal strength, tune into it
manually and store it as described in “Manual preset
tuning”.
• (Europe model only) Only Radio Data System
broadcasting station are stored automatically by automatic
preset tuning.
preset tuning.
You can also store up to 40 stations (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups)
manually.
station numbers in each of the 5 preset station groups)
manually.
1
Tune into a station automatically or manually.
See page 53 for tuning instructions.
2
Press
K
MEMORY
.
The MEMORY indicator flashes in the front panel
display for approximately 10 seconds.
display for approximately 10 seconds.
3
Press
G
A/B/C/D/E
repeatedly to select a
preset station group (A to E) while the
MEMORY indicator is flashing.
MEMORY indicator is flashing.
The selected preset station group letter appears.
Check that the colon (:) appears in the front panel
display.
Check that the colon (:) appears in the front panel
display.
4
Press
H
PRESET/TUNING/CH l
/
h
to
select a preset station number (1 to 8) while
the MEMORY indicator is flashing.
the MEMORY indicator is flashing.
• Press Hh to select a higher preset station number.
• Press Hl to select a lower preset station number.
• Press Hl to select a lower preset station number.
Automatic preset tuning
Notes
AUTO MEMORY
A 1 : F M 8 8 . 9 M H z
Flashes
Flashes
Manual preset tuning
MEMORY
Flashes
MEMORY
A : F M 8 8 . 9 M H z
Preset station group
Flashes
Colon (:)
MEMORY
A 1 : F M 8 8 . 9 M H z
Preset station number
Flashes