Yamaha RX-V461 Manuale Utente

■ Checking the supplied accessories
Check that you received all of the following parts.

The form of the supplied accessories varies depending on the 
models.

■ VOLTAGE SELECTOR 

Select the switch position (upper or lower) 
according to your local voltage using a straight 
slot screwdriver.
Voltages are 110-120/220-240 V AC, 50/60 Hz.

■ Installing batteries in the remote control

• Change all of the batteries if you notice the following 

conditions:
– the operation range of the remote control decreases.
– the TRANSMIT indicator does not flash or its light becomes 

dim.

• Do not use an old battery and a new one together.
• Do not use different types of batteries (such as alkaline and 

manganese batteries) together. Read the packaging carefully as 
these different types of batteries may have the same shape and 
color.

• If the batteries have leaked, dispose of them immediately. Avoid 

touching the leaked material or letting it come into contact with 
clothing, etc. Clean the battery compartment thoroughly before 
installing new batteries.

• Do not throw away batteries with general house waste; dispose 

of them correctly in accordance with your local regulations.

• If the remote control is without batteries for more than 2 

minutes, or if exhausted batteries remain in the remote control, 
the contents of the memory may be cleared. When the memory 
is cleared, insert new batteries and set up the remote control 
code.

The VOLTAGE SELECTOR on the rear panel of this 
unit must be set for your local voltage BEFORE 
plugging the power cable into the AC wall outlet. 
Improper setting of the VOLTAGE SELECTOR may 
cause damage to this unit and create a potential fire 
hazard.