Yamaha RX-V363 Manuale Utente

Pagina di 76
23 
En
Basic setup
PREP
ARA
TION
English
7
Press 7n to select “SET” and then 7l / h 
to select the desired setting.
SET  >CANCEL
Choices: SET, CANCEL
• Select “SET” to apply the settings you made.
• Select “CANCEL” to cancel the setup procedure 
without making any changes.
y
You can also press HMENU to cancel the setup procedure.
8
Press 7
ENTER to confirm your selection.
If you selected “SET” in step 7, each speaker outputs 
a test tone twice in turn. “CHECK:TestTone” appears 
in the front panel display for a few seconds and then 
“CHECK OK?” appears in the front panel display.
y
• Check the speaker connections (see page 5) and adjust the 
“SPEAKERS” settings back in step 6, if necessary.
• The indicator of the speaker currently outputting the test 
tone flashes in the front panel display.
9
Press 7l / h to select the desired setting.
Choices: YES, NO
• Select “YES” to complete the setup procedure if 
the test tone levels from each speaker were 
satisfactory.
• Select “NO” to proceed to the speaker level 
adjustment menu to balance the output level of 
each speaker.
10
Press 7
ENTER to confirm your selection.
• If you selected “YES” in step 9, the setup 
procedure is completed and the display returns to 
the top set menu display. Press HMENU to exit 
from “BASIC SETUP”.
• If you selected “NO” in step 9, the front speaker 
level adjustment display appears in the front panel 
display.
11
Press 7k / n to select a speaker and then 
7l / h to adjust the balance.
The selected speaker and the front left speaker (or the 
surround left speaker) output a test tone in turn.
• Press 7h to increase the value.
• Press 7l to decrease the value.
  FR ----||----
• Select “FR” to adjust the balance between the front 
left and right speakers.
• Select “C” to adjust the balance between the front 
left and center speakers.
• Select “SL” to adjust the balance between the front 
left and surround left speakers.
• Select “SR” to adjust the balance between the 
surround left and surround right speakers.
• Select “SWFR” to adjust the balance between the 
front left speaker and the subwoofer.
The available speaker channels differ depending on the 
setting of the speakers.
12
Press H
MENU to exit from “BASIC SETUP”.
CHECK:TestTone
CHECK OK?  
..YES
Note
01EN_RX-V363_U.book  Page 23  Friday, December 7, 2007  5:44 PM
Black process 45.0° 240.0 LPI