Yamaha RX-A2010 Manuale Utente

En

■ 

Configures the output characteristics of the speakers.

• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 

16 cm (6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).

❑ Front

Selects the size of the front speakers.

• “Front” is automatically set to “Large” when both “Subwoofer 1” and “Subwoofer 2” are set to “None”.

❑ Center

Selects whether or not a center speaker is connected and its size.

❑ Surround

Selects whether or not surround speakers are connected and its size.

❑ Surround Back

Selects whether or not surround back speakers are connected and its size.

• “Surround Back” is automatically set to “None” when “Surround” is set to “None”.

❑ Front Presence

Selects whether or not front presence speakers are connected.

❑ Rear Presence

Selects whether or not to rear presence speakers are connected.

• “Rear Presence” is automatically set to “None” when “Surround” or “Front Presence” is set to “None”.

Large

Select this for large speakers.
The front speakers will produce all of the front channel frequency 
components.

Small (default)

Select this for small speakers.
The subwoofer will produce front channel components lower than the 
specified crossover frequency (default: 80Hz).

Large

Select this for large speaker.
The center speaker will produce all of the center channel frequency 
components.

Small (default)

Select this for small speaker.
The subwoofer will produce center channel components lower than the 
specified crossover frequency (default: 80Hz).

None

Select this when no center speaker is connected.
The front speakers will produce center channel audio.

Large

Select this for large speakers.
The surround speakers will produce all of the surround channel 
frequency components.

Small (default)

Select this for small speakers.
The subwoofer will produce surround channel components lower than 
the specified crossover frequency (default: 80Hz).

None

Select this when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual 
CINEMA DSP works when you select a sound program.

Large x1

Select this when 1 large speaker is connected.
The surround back speaker will produce all of the surround back channel 
frequency components.

Large x2

Select this when 2 large speakers are connected.
The surround back speakers will produce all of the surround back channel 
frequency components.

Small x1

Select this when 1 small speaker is connected.
The subwoofer will produce surround back channel components lower than 
the specified crossover frequency (default: 80Hz).

Small x2 
(default)

Select this when 2 small speakers are connected.
The subwoofer will produce surround back channel components lower than 
the specified crossover frequency (default: 80Hz).

None

Select this when no surround back speakers are connected.
The surround speakers and subwoofer (or front speakers) will produce 
surround back channel audio.

Use (default)

Select this when front presence speakers are connected.

None

Select this when no front presence speakers are connected.

Use

Select this when rear presence speakers are connected.

None (default)

Select this when no rear presence speakers are connected.