Yamaha RX-A2010 Manuale Utente

En

When “Multi Position” is set to “Yes”, follow the procedure below to 
make the measurement.

• YPAO measurement is not performed correctly when any obstacles are in the 

room.

• During the measuring process, keep stuff in the corners or remove it from the 

room. It takes about 10 minutes to make the measurement at 8 listening positions.

• If any error message (such as E-1) or warning message (such as W-1) appears, 

see “Error messages” (p.49) or “Warning messages” (p.50).

The measurement will start in 10 seconds. Press ENTER 
again to start the measurement immediately.

• To cancel the measurement, press RETURN.

The following screen appears on the TV when the 
measurement at the first position finishes.

Repeat step 2 until the measurement at all listening 
positions (up to 8) are made.

If you have made the measurement at 8 listening positions, 
the following screen appears automatically.

• To check the measurement results, select “Result”. For details, see 

The corrected speaker settings are applied.

• To finish the measurement without saving the result, select “CANCEL”.

Now optimization of the speaker settings is complete.