Yamaha RX-V690 Manuale Utente

27

You can adjust the time difference between the beginning of
the source sound and the beginning of the effect sound with
the DELAY TIME control.
The DELAY TIME control is effective with all programs.
By applying more or less delay, sound effects, background
noise, and ambient noise coming at you from the rear speakers
can be enhanced or subdued for extra effect.

: from 15 to 30 milliseconds

(Preset value: 20 milliseconds)

: from 15 to 30 milliseconds

(Preset value: 20 milliseconds)

: from 1 to 50 milliseconds

(Preset value: 17 milliseconds)

: from 1 to 50 milliseconds

(Preset value: 28 milliseconds)

: from 1 to 50 milliseconds

(Preset value: 20 milliseconds)

: from 1 to 50 milliseconds

(Preset value: 45 milliseconds)

7. ROCK CONCERT : from 1 to 50 milliseconds

(Preset value: 22 milliseconds)

: from 1 to 50 milliseconds

(Preset value: 26 milliseconds)

: from 1 to 50 milliseconds

(Preset value: 40 milliseconds)

10. CONCERT HALL : from 1 to 50 milliseconds

(Preset value: 30 milliseconds)

By continuously pressing “+” or “–” on the DELAY TIME
control, the value changes continuously.
However, the value stops changing momentarily at the preset
point.

Note
Adding too much delay will cause an unnatural effect with
some sources.  Experiment with the DELAY TIME control to
create the effect that you find most suitable.

Adjustable

Note
The values of the DELAY TIME, CENTER LEVEL and REAR
LEVEL you set the last time will remain memorized even when
the power of this unit is off.
However, if the power cord is kept disconnected for more than
one week, these values will be automatically changed back to
the original factory settings.