Yamaha RX-V2400 Manuale Utente

Use to manually adjust any speaker setting or compensate 
for video signal processing delays when using LCD 
monitors or projectors. Most of the SOUND parameters 
are set automatically when you run auto setup (See 
page 24).

■

  SPEAKER SET

Use to manually adjust any speaker setting.

Set any THX speakers to SMALL.

  CENTER SP

Choices: LARGE, 

, NONE

• Select LARGE if you have a large center speaker. The 

unit directs the entire range of the center channel signal 
to the center speaker.

• Select SMALL if you have a small center speaker. The 

unit directs the low-frequency signals of the center 
channel to the speakers selected with “BASS OUT”.

• Select NONE if you do not have a center speaker. The 

unit directs all of the center channel signal to the front 
left and right speakers.

  FRONT SP

Choices: LARGE, 

• Select LARGE if you have large front speakers. The 

unit directs the entire range of the front left and right 
channel signals to the front left and right speakers.

• Select SMALL if you have small front speakers. The 

unit directs the low-frequency signals of the front 
channel to the speakers selected with “BASS OUT”.

  SURR L/R SP

Choices: LARGE, 

, NONE

• Select LARGE if you have large surround left and right 

speakers or if a rear subwoofer is connected to the 
surround speakers. The entire range of the surround 
channel signal is directed to the surround left and right 
speakers.

• Select SMALL if you have small surround left and 

right speakers. The low-frequency signals of the 
surround channel are directed to the speakers selected 
with “BASS OUT”.

• Select NONE if you do not have surround speakers. 

This will set the unit to the Virtual Cinema DSP mode 
(see page 34) and automatically set the surround back 
speaker setting (SURR B L/R SP below) to NONE.

SURR B L/R SP
Choices: LRGx2, LRGx1, 

, SMLx1, NONE

• Select LRGx2 if you have 2 large surround back 

speakers. The unit directs the entire range of the 
surround back channel signal to the surround back 
speakers.

• Select LRGx1 if you have a large surround back 

speaker. The unit directs the entire range of the 
surround back channel signal to the left surround back 
speaker.

• Select SMLx2 if you have 2 small surround back 

speakers. The low-frequency signals of the surround 
back channels are directed to the speakers selected with 
“BASS OUT”.

• Select SMLx1 if you have a small surround back 

speaker. The low-frequency signals of the surround 
back channel are directed to the speakers selected with 
“BASS OUT”, and the rest of the frequency signals are 
directed to the left surround back speaker.

• Select NONE if you do not have a surround back 

speaker. The unit directs all of the surround back 
channel signal to the surround left and right speakers.

If you select LRGx1 or SMLx1, connect a speaker to the left 
SURROUND BACK speaker terminals.

 

. A)SPEAKERSET

B)SPEAKERLEVEL

C)SPDISTANCE

D)GRAFICEQ

: Up/Down

p

/p

: Select

- / +

2 SOUND MENU

NONE [SML

LRG

CENTER SP

[SMALL

LARGE

FRONT SP

NONE [SML

LRG

SURR L/R SP

SWLx1 [SMLx2

SURR B L/R SP

00_RX-V2400U_EN.book  Page 49  Friday, October 10, 2003  10:54 AM