Yamaha AVENTAGE RX-A2020 Manuale Utente

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input).

Selects a device to output audio.

Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.

Configures the network parameters (such as IP address).

Selects whether to enable/disable the function that turns on the unit from other network devices.

Sets the MAC address filter to limit access to the unit from other network devices.

Edits the network name (the unit’s name on the network) displayed on other network devices.

Changes the zone name (for main zone) displayed on the front display or TV screen.

Enables/disables volume adjustments for Zone2 or Zone3 output.

Sets the Zone2 or Zone3 maximum volume to prevent excessive loudness in the second zone.

Sets the Zone2 or Zone3 initial volume for when the unit is turned on.

Switches between stereo and monaural for Zone2 or Zone3 output.

Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV screen.

Changes the zone name (for Zone2 or Zone3) displayed on the front display or TV screen.

Changes the scene names (for Zone4) displayed on the front display or TV screen.

Changes the zone name (for Zone4) displayed on the front display or TV screen.

Select the zone for which the MONITOR OUT/ZONE OUT jacks are used.

Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used.

Enables/disables switching to the party mode for each zone.

Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source.

Adjusts the brightness of the front display.

Selects whether to display short messages on the TV screen when the unit is operated.

Selects the image to be used as wallpaper on the TV.

Specifies the condition for the TRIGGER OUT jack to function.

Specifies the zone with which the TRIGGER OUT jack functions are synchronized.

Prevents accidental changes to the settings.

Sets the amount of time for the auto-standby function.

Enables/disables the eco mode (power saving mode).

Select an on-screen menu language.