ONKYO TX-NR905 Manuale Utente
34
Connecting Your Components
—Continued
By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you
can switch the audio and video signals simultaneously simply by changing the input source on the AV receiver.
can switch the audio and video signals simultaneously simply by changing the input source on the AV receiver.
The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format
you choose will depend on the formats supported by your other components. Use the following sections as a guide.
you choose will depend on the formats supported by your other components. Use the following sections as a guide.
For video components, you must make an audio connection and a video connection.
Video Connection Formats
Video equipment can be connected to the AV receiver by using any one of the following video connection formats:
composite video, S-Video, component video, or HDMI, the latter offering the best picture quality.
composite video, S-Video, component video, or HDMI, the latter offering the best picture quality.
The AV receiver can upconvert and downconvert between video formats, depending on the HDMI Monitor setting,
which generally determines whether video signals are upconverted for the component video output or the HDMI out-
puts.
which generally determines whether video signals are upconverted for the component video output or the HDMI out-
puts.
For optimal video performance, THX recommends that video signals pass through the system without upconver-
sion (e.g., component video input through to component video output). It’s also recommended that you set the
Immediate Display preference to Off (page 107).
sion (e.g., component video input through to component video output). It’s also recommended that you set the
Immediate Display preference to Off (page 107).
■
HDMI Monitor Setting Set to Main or Sub
With the HDMI Monitor setting set to Main or
Sub (see page 52), video input signals flow
through the AV receiver as shown, with com-
posite video, S-Video, and component video
sources all being upconverted for the respec-
tive HDMI output.
Sub (see page 52), video input signals flow
through the AV receiver as shown, with com-
posite video, S-Video, and component video
sources all being upconverted for the respec-
tive HDMI output.
Use the Main or Sub set-
ting if you connect the AV receiver’s HDMI
OUT MAIN or HDMI OUT SUB, respec-
tively, to your TV.
OUT MAIN or HDMI OUT SUB, respec-
tively, to your TV.
The composite video, S-Video, and component
video outputs pass through their respective
input signals as they are.
video outputs pass through their respective
input signals as they are.
Connecting Audio and Video Signals to the AV Receiver
: Signal Flow
Video
Video
Audio
Speakers (see page 26 for hookup details)
DVD player, etc.
TV, projector,
etc.
Audio
Which Connections Should I Use?
IN
MONITOR OUT
DVD player, etc.
AV receiver
TV, projector, etc.
Composite
S-Video
Component
Video Signal Flow Chart
HDMI
Composite
S-Video
Component
HDMI
TX-NR905_En.book Page 34 Wednesday, January 23, 2008 1:36 PM