ONKYO TX-SA705 Manuale Utente
12
Front & Rear Panels—Continued
The page numbers in parentheses show where you can find the main explanation for each item.
DIGITAL OPTICAL IN 1, 2 and OUT
These optical digital audio inputs are for connecting
components with optical digital audio outputs, such
as CD and DVD players.
These optical digital audio inputs are for connecting
components with optical digital audio outputs, such
as CD and DVD players.
The optical digital audio output is for connecting a
digital recorder with an optical digital input, such as
a CD recorder.
digital recorder with an optical digital input, such as
a CD recorder.
DIGITAL COAXIAL IN 1, 2 and 3
These coaxial digital audio inputs are for connect-
ing components with coaxial digital audio outputs,
such as CD and DVD players.
These coaxial digital audio inputs are for connect-
ing components with coaxial digital audio outputs,
such as CD and DVD players.
SIRIUS antenna (North American models
only)
This jack is for connecting a SIRIUS Satellite Radio
antenna (see the separate SIRIUS instructions).
only)
This jack is for connecting a SIRIUS Satellite Radio
antenna (see the separate SIRIUS instructions).
XM antenna (North American models only)
This jack is for connecting an XM Minituner and
Home Dock, sold separately (see the separate XM
instructions).
This jack is for connecting an XM Minituner and
Home Dock, sold separately (see the separate XM
instructions).
HDMI IN 1, 2, 3, and OUT
HDMI (High Definition Multimedia Interface) con-
nections carry digital audio and digital video.
HDMI (High Definition Multimedia Interface) con-
nections carry digital audio and digital video.
The HDMI inputs are for connecting components
with HDMI outputs, such as DVD players.
with HDMI outputs, such as DVD players.
The HDMI output is for connecting a TV or projec-
tor with an HDMI input.
tor with an HDMI input.
AM ANTENNA (TX-SR705 only) (25)
These push terminals are for connecting an AM
antenna.
These push terminals are for connecting an AM
antenna.
FM ANTENNA (TX-SR705 only) (25)
This jack is for connecting an FM antenna.
This jack is for connecting an FM antenna.
MONITOR OUT
The S-Video or composite video jack should be
connected to a video input on your TV or projector.
The S-Video or composite video jack should be
connected to a video input on your TV or projector.
FRONT, CENTER, SURR & SURR BACK
SPEAKERS (23)
These terminal posts are for connecting your front,
center, surround, and surround back speakers.
SPEAKERS (23)
These terminal posts are for connecting your front,
center, surround, and surround back speakers.
(1
RS232
This port is for connecting the AV receiver/AV
amplifier to home automation equipment and exter-
nal controllers.
This port is for connecting the AV receiver/AV
amplifier to home automation equipment and exter-
nal controllers.
(2
ZONE 2 LINE OUT (99)
This analog audio output can be connected to a line
input on an integrated amplifier in Zone 2.
This analog audio output can be connected to a line
input on an integrated amplifier in Zone 2.
(3
ZONE 2 SPEAKERS (99)
These terminals are for connecting speakers in
Zone 2.
These terminals are for connecting speakers in
Zone 2.
(4
AC INLET (not North American models)
The supplied power cord is connected here. The
other end of the power cord should be connected to
a suitable wall outlet.
The supplied power cord is connected here. The
other end of the power cord should be connected to
a suitable wall outlet.
(5
PHONO IN
This audio input is for connecting a turntable.
This audio input is for connecting a turntable.
(6
REMOTE CONTROL
This
(Remote Interactive) jack can be con-
nected to an
jack on another Onkyo AV compo-
nent. The AV receiver/AV amplifier’s remote
controller can then be used to control that compo-
nent. To use
controller can then be used to control that compo-
nent. To use
, you must make an analog audio
connection (RCA) between the AV receiver/AV
amplifier and the other AV component, even if they
are connected digitally.
amplifier and the other AV component, even if they
are connected digitally.
(7
COMPONENT VIDEO IN 1, 2, 3, and OUT
These component video inputs can be used to con-
nect AV components with component video outputs,
such as DVD players.
These component video inputs can be used to con-
nect AV components with component video outputs,
such as DVD players.
This component video output can be used to con-
nect a TV or projector with a component video
input.
nect a TV or projector with a component video
input.
(8
GND screw
This screw is for connecting a turntable’s ground
wire.
This screw is for connecting a turntable’s ground
wire.
(9
TUNER IN (TX-SA705 only) (41)
This analog audio input is for connecting a tuner’s
analog audio output.
This analog audio input is for connecting a tuner’s
analog audio output.
(:
CD IN
This analog audio input is for connecting a CD
player’s analog audio output.
This analog audio input is for connecting a CD
player’s analog audio output.
)1
TAPE IN/OUT
This analog audio input and output are for connect-
ing a recorder with an analog audio input and output
(cassette, Mini Disc, etc.).
This analog audio input and output are for connect-
ing a recorder with an analog audio input and output
(cassette, Mini Disc, etc.).
)2
GAME/TV IN
Here you can connect a game console, TV, etc.
Input jacks include S-Video, composite video, and
analog audio.
Here you can connect a game console, TV, etc.
Input jacks include S-Video, composite video, and
analog audio.
)3
CBL/SAT IN
Here you can connect a cable/satellite receiver, set-
top box, etc. Input jacks include S-Video, composite
video, and analog audio.
Here you can connect a cable/satellite receiver, set-
top box, etc. Input jacks include S-Video, composite
video, and analog audio.
)4
VCR/DVR IN/OUT
Here you can connect a VCR or DVR (digital video
recorder). Input and output jacks include S-Video,
composite video, and analog audio.
Here you can connect a VCR or DVR (digital video
recorder). Input and output jacks include S-Video,
composite video, and analog audio.