ONKYO HT-RC460 Manuale Utente

You can assign a default listening mode to each input 
source that will be selected automatically when you select 
each input source. For example, you can set the default 
listening mode to be used with Dolby Digital input signals. 
You can select other listening modes during playback, but 
the mode specified here will be resumed once the AV 
receiver has been set to standby.

■

Analog/PCM/Digital
With this setting, you can specify the listening mode 
used when an analog (CD, TV, LD, VHS, MD, turntable, 
radio, cassette, cable, satellite, etc.) or PCM digital (CD, 
DVD, etc.) audio signal is played.

• For  the  “AUX”, “EXTRA1”, and “EXTRA2” input selectors, 

only “PCM” is available.

■

Mono/Multiplex Source
With this setting, you can specify the listening mode 
used when a mono digital audio signal is played (DVD, 
etc.).

■

2ch Source
With this setting, you can specify the listening mode 
used when 2-channel (2/0) stereo digital sources, such as 
Dolby Digital or DTS, are played.

■

Dolby D/Dolby D Plus/TrueHD
With this setting, you can specify the listening mode 
used when Dolby Digital or Dolby Digital Plus format 
digital audio signals are played (DVD, etc.). Specifies 
the default listening mode for Dolby TrueHD sources, 
such as Blu-ray or HD DVD (input via HDMI).

■

DTS/DTS-ES/DTS-HD
With this setting, you can specify the listening mode 
used when DTS or DTS-HD High Resolution format 
digital audio signals are played (DVD, LD, CD, etc.). 
Specifies the default listening mode for DTS-HD Master 
Audio sources, such as Blu-ray or HD DVD (input via 
HDMI).

■

Other Multich Source
Specifies the default listening mode for multichannel 
PCM sources from HDMI IN such as DVD-Audio, and 
DSD multichannel sources such as Super Audio CD.

q/w to select the input source that you want to 

The following menu appears.

“Setup”

e r

q/w to select the signal format that you want to 

e/r to select a listening mode.

Only listening modes that can be used with each input 
signal format can be selected (

).

The “Last Valid” option means that the listening 
mode selected last will be used.
The “Straight Decode” option means that straight 
decoding listening mode (Dolby Digital, DTS, etc.) is 
selected.

• For  the  “AM” or “FM” input selector, only “Analog” will 

be available.

• For  the  “NET” or “USB” input selector, only “Digital” 

will be available.