ONKYO HT-R368 Manuale Utente

With the RI Dock, you can easily play the music stored on 
your Apple iPod/iPhone through the AV receiver and enjoy 
great sound, and watch iPod/iPhone slideshows and videos 
on your TV. In addition, the on-screen display (OSD) 
allows you to view, navigate, and select your iPod/iPhone 
model’s contents on your TV, and with the supplied remote 
controller, you can control your iPod/iPhone from the 
comfort of your sofa. You can even use the AV receiver’s 
remote controller to operate your iPod/iPhone.

• Enter the appropriate remote control code before using the AV 

receiver’s remote controller for the first time (

• Connect the RI Dock to the AV receiver with an 

u cable 

(

).

• Set the RI Dock’s RI MODE switch to “HDD” or 

“HDD/DOCK”.

• Set the AV receiver’s Input Display to “DOCK” (

).

■

System On
When you turn on the AV receiver, the RI Dock and 
iPod/iPhone turn on automatically. In addition, when RI 
Dock and iPod/iPhone are on, the AV receiver can be 
turned on by pressing 

9 ON/STANDBY.

If you press the remote controller’s 

1 (Playback) while 

the AV receiver is on 

standby

, the AV receiver will 

automatically turn on, select your iPod/iPhone as the input 
source, and your iPod/iPhone will start playback.

Direct Change
If you start iPod/iPhone playback while listening to another 
input source, the AV receiver will automatically switch to 
the input to which RI Dock is connected.

Other Remote Operations
You can use the remote controller that came with the AV 
receiver to control other iPod/iPhone functions. The 
available functionality depends on the AV receiver.

iPod/iPhone Alarm
If you use the Alarm function on your iPod/iPhone to start 
playback, the AV receiver will turn on at the specified time 
and select your iPod/iPhone as the input source 
automatically.

• Linked operations do not work with video playback or when the 

alarm is set to play a sound.

• If you use your iPod/iPhone with any other accessories, 

iPod/iPhone playback detection may not work.

• The System On function may not work depending on the RI 

Dock.

By pressing the REMOTE MODE button that’s been 
programmed with the remote control code for your Dock, 
you can control your iPod/iPhone in the Dock with the 
buttons described further in this section.
See “Entering Remote Control Codes” for details on 
entering a remote control code (

See the Dock’s instruction manual for more information.

PORT is preprogrammed with the remote control code for 
controlling a Dock with Universal Port connector.
You can control your iPod/iPhone when “PORT” is 
selected as the input source.

• Set the RI Dock’s RI MODE switch to “HDD” or 

“HDD/DOCK”.

•

9 ON/STANDBY may not work with a remote control 
code (without 

u). In this case, make an u connection 

and enter the remote control code 81993 (with 

u).

■

Make an 

u connection and enter the remote

control code 81993 (with 

u).

• Set the AV receiver’s Input Display to “DOCK” 

(

).

■

You must enter the remote control code 82990 first 
(

■

• Use the AV receiver’s volume control to adjust the playback 

volume.

• While your iPod/iPhone is inserted in the RI Dock, its volume 

control has no effect.

• If you do adjust the volume control on your iPod/iPhone while 

it’s inserted in the RI Dock, be careful that it’s not set too loud 
before you reconnect your headphones.