Sony STR-DA1800ES Manuale Utente
107
US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm
masterpage: Right
STR-DA1800ES
4-428-194-12(2)
4-428-194-12(2)
Adj
u
s
tin
g Setti
ng
s
s
To check the software version
1
Select “Software Update”, then press
.
2
Select “Version”, then press
.
The software version appears on the TV
screen.
screen.
Bluetooth Settings
You can adjust the settings for the Bluetooth.
x Pairing
Lets you pair the Bluetooth device with the
receiver.
receiver.
x BT Standby (Bluetooth Standby)
While the “BT Standby” mode is set to “ON”,
the receiver can be controlled by the Bluetooth
device even when the receiver is in standby
mode.
the receiver can be controlled by the Bluetooth
device even when the receiver is in standby
mode.
1
Select “BT Standby”, then press
.
2
Select “ON” or “OFF”, then press
.
• ON: The receiver turns on automatically
when the Bluetooth device is connected
to the receiver.
to the receiver.
• OFF: The receiver does not turns on.
Note
You can only select this parameter when a Bluetooth
device is paired.
device is paired.
x Clear History
Lets you clear all paired Bluetooth device and
connection information from the receiver.
connection information from the receiver.
1
Select “Clear History”, then press
.
“Clear all history?” appears on the TV
screen.
screen.
2
Press
B/b to select “OK”, then press
.
“Complete!” appears, and all history is
deleted.
deleted.
Note
You cannot clear the history in the following cases.
– No paired Bluetooth devices in history.
– When you perform a pairing operation.
– No paired Bluetooth devices in history.
– When you perform a pairing operation.
x Address Info
Lets you check the Bluetooth device address
information. You can check the address
information when a Bluetooth device is
connected.
information. You can check the address
information when a Bluetooth device is
connected.
System Settings
You can adjust the settings of the receiver.
x 12V Trigger
Lets you select various options for use of the
12V Trigger function.
• OFF: Turns off output of 12V trigger even
12V Trigger function.
• OFF: Turns off output of 12V trigger even
when the main receiver is turned on.
• CTRL: Turns the output of 12V trigger on
or off manually using the control command
of an external control device.
of an external control device.
• ZONE: Turns the output of 12V trigger on
or off based on whether the main zone is
turned on or off.
turned on or off.
• INPUT (for “Main” only): Turns on the
output of 12V trigger when the preset input
is selected.
is selected.
When you select “Input”, the setting display
which sets each input trigger to on/off
appears. Press
which sets each input trigger to on/off
appears. Press
V/v to select the input, then
press
to select on or off.
• HDMI A (for “Main” only): Turns the
output of 12V trigger on or off based on the
output setting of the HDMI OUT A jack.
output setting of the HDMI OUT A jack.
• HDMI B (for “Main” only): Turns the
output of 12V trigger on or off based on the
output setting of the HDMI OUT B jack.
output setting of the HDMI OUT B jack.
x RS232C Ctrl
Lets you turn the control mode for
maintenance and service on or off.
• ON
• OFF
maintenance and service on or off.
• ON
• OFF
continued