Roland 115 Manuale Utente
14
Panel descriptions
5. TUNER OUT Jack
Connect tuners to this jack.
* Other than the PICKUP TYPE switch, none of the D-BASS
210/115’s switches/knobs affect the TUNER OUT output.
6. BALANCED OUT Jack
Use this to connect to external PAs and other such
systems.
You can switch the sound that is output to suit the
particular application.
This professional-grade feature includes a tough, reliable
XLR-type connector and ground lift switch.
systems.
You can switch the sound that is output to suit the
particular application.
This professional-grade feature includes a tough, reliable
XLR-type connector and ground lift switch.
The output level is +4 dBu.
SELECT Switch
* The VOLUME knob has no effect on the signal from
BALANCED OUT. Control the volume with the PA system.
GND LIFT Switch
Loop hum noise may occur when other external devices
are connected to the D-BASS 210/115. In such instances,
you may be able to mitigate the problem by switching
the position of the GND LIFT switch.
The GND LIFT switch should be normally set to OFF.
are connected to the D-BASS 210/115. In such instances,
you may be able to mitigate the problem by switching
the position of the GND LIFT switch.
The GND LIFT switch should be normally set to OFF.
DI OUT
Signals input to the INPUT jack are
output as is.
Other than the PICKUP TYPE switch
and GAIN knob, none of the D-BASS
210/115’s switches/knobs affect the
BALANCED OUT output.
output as is.
Other than the PICKUP TYPE switch
and GAIN knob, none of the D-BASS
210/115’s switches/knobs affect the
BALANCED OUT output.
LINE OUT
Outputs the same signal as that from
LINE OUT.
The sound is changed by the settings of
the D-BASS 210/115’s switches/knobs,
except for the VOLUME knob.
LINE OUT.
The sound is changed by the settings of
the D-BASS 210/115’s switches/knobs,
except for the VOLUME knob.
ON
Pin 1 is disconnected from the
D-BASS 210/115’s ground.
D-BASS 210/115’s ground.
OFF
Pin 1 connects to the D-BASS 210/115’s
ground.
ground.
210/115