Radio Shack 85 Manuale Utente

21

Before you begin mounting the amplifier, make sure you have the following sup-
plied hardware necessary for mounting.

• 6 sheet-metal screws

• 6 spring washers 

• 6 flat washers 

Then confirm that the amplifier fits your vehicle’s mounting area.

Caution: Be careful to not drill into anything behind the mounting surface

1. Temporarily disconnect your vehicle battery’s negative (

-

) cable again.

2. To make mounting more convenient, temporarily disconnect the amplifier’s

connections (ground, primary power, remote power, your vehicle stereo’s
input, and speakers).

12-1977.fm  Page 21  Tuesday, July 13, 1999  10:07 AM