Radio Shack 85 Manuale Utente
26
REPLACING THE FUSES
If the amplifier shuts down, you might need to replace the power wire’s 50-amp
tube-type fuse, either of the two 25-amp blade-type fuses on the back panel, or
all three fuses.
tube-type fuse, either of the two 25-amp blade-type fuses on the back panel, or
all three fuses.
Cautions:
• Do not use a fuse with ratings other than those specified here. Doing so
might damage your amplifier.
• After replacing a fuse, let the amplifier cool down before you turn it on
again.
Turn off your autosound system, then disconnect the cable from your vehicle bat-
tery’s negative (
tery’s negative (
-
) terminal.
Replacing the Tube-Type Fuse
1. Grasp the two ends of the power
wire’s fuse holder and twist one of
them counterclockwise, then pull the
ends apart.
them counterclockwise, then pull the
ends apart.
2. Insert a new 50-amp, tube-type fuse
into the longer of the fuse-holder’s
ends, then grasp the fuse-holder’s two
ends, push them in and twist them
clockwise.
ends, then grasp the fuse-holder’s two
ends, push them in and twist them
clockwise.
Replacing a Blade-Type Fuse
1. Grasp the fuse’s plastic end and pull it
out.
2. Grasp the new fuse’s plastic end and
simply push it in.
(Illus for
Step 1
Step 1
(Illus for
Step 1
Step 1
12-1977.fm Page 26 Tuesday, July 13, 1999 10:07 AM