Cary Audio Design 2.125 Manuale Utente

 

 

9

 

 

1.  LOUDSPEAKER BINDING POSTS (OUTPUTS) 

•  Provide audio output. Two pair of custom-made, high-current Cardas binding posts 

labeled + (positive) and - (negative) are included. 

•  These binging posts are designed to facilitate high pressure, high contact area 

connections without the use of tools such as nut drivers. A simple finger-tightening 

actually yields higher contact pressure than traditional hex binding posts. There is no 

need to exert unusual effort when tightening.

 

•  CAUTION! 

NEVER connect power amplifier outputs to any component other than a loudspeaker. 

NEVER short-circuit power amplifier outputs. 

NEVER connect power amplifier outputs to another power amplifier's outputs. 

DO NOT OVERTIGHTEN the Model 2.125 binding posts. Tight, high-contact pressure 

connections can be achieved with finger-tightening. 

DO NOT FORCE the Model 2.125 binding post "wings" up and over a bent or oversized 

connector. Doing so may result in binding post damage. If the connector obstructs 

"wing"-turning, slide it into place when the binding post opening provides a snug fit. 

Then, use quarter-turns to tighten the connection as needed. 

 

•  Provide DC trigger control. One 3.5mm mini-jack is available to receive 12V DC signals 

from a connected component. Toggling the connected component between ON and 

STANDBY will toggle the Model 2.125 into and out of STANDBY. 

 

•  Connect to an AC power supply using the included power supply cord.