Pass Labs XP-30 Manuale Utente

5

XP-30 Owner’s Manual

Setup and Operation
So much for self-congratulation.  Lets play some music!

On a more sober note, please read and understand the operational 
instructions and safety issues associated with this product.

All of  us at Pass Laboratories put great effort into building a soundly 
engineered and superbly performing rugged product of  lasting 
durability and value.  We understand that things occasionally go 
wrong, but we are here to support you if  that happens.  If  you have 
any questions or problems, please contact either your dealer or the 
factory.

The support email address is:

If  you don’t get a good enough answer, you can appeal to

or even

It is usually helpful to have your product’s serial number available 
when you contact the factory.  It is by serial number that we track all 
hardware and software details and history of  an individual product 
unit.

Power Connection
As with all audio electronics the power cable should be the last thing 
attached and the first one removed any time you hook up or remove 
equipment from the signal chain.

First
The preamplifier’s voltage and current ratings are indicated by affixed 
tag on the rear of  the preamplifier’s power supply / control module.  
The tag will indicate 240 volts, 220 volts, 120 volts or 100 volts.

A 2.0 amp 3AG slow blow fuse is provided with stereo 100 –120 volt 
units and a 1.0 amp 3AG slow blow fuse is provided with stereo 220 
– 240 volt units.