Klipsch RCX-3 Dépliant

Pagina di 1
RCX-3
S P E C I F I C A T I O N S
BANDWIDTH
105Hz-20kHz ± 3dB
SENSITIVITY
90dB @ 2.83 volts/1 meter
NOMINAL IMPEDANCE 
8 ohms compatible
CROSSOVER FREQUENCY
2740Hz
POWER HANDLING
40 watts (160 watts peak)
ENCLOSURE TYPE
Bass reflex via dual rear-firing ports
DRIVE COMPONENTS
Two-way system using one .75'' (1.8cm) 
magnetically shielded, titanium dome 
compression driver tweeter with an integral 
round 90˚ MircroTractix Horn and one 3.5'' 
(8.9cm) magnetically shielded, Cerametallic
cone woofer
WEIGHT
5.8 lbs. (2.6kg) including base
HEIGHT
6.5" (16.5cm) including base, 5.4" (13.7cm) 
w/out base
WIDTH
8.8" (22.2cm)
DEPTH
6" (12.2cm)
FINISH
Black or Silver
MOUNTING
Base swivels 360˚ for on-wall mounting via 
keyholes
High sensitivity
MicroTractrix Horn tweeter for clean, detailed highs
Ball-joint pedestal stand with keyholes allows easy placement
Integrates well with all Klipsch powered subwoofers
Magnetically shielded to prevent video interference
3.5'' Two-Way Center-Channel Satellite Loudspeaker
As one of the newest members of the
Reference Satellite family, the RCX-3 is the
smallest and most affordable center channel in
the line. As with all Reference Satellite
products, this compact loudspeaker was
designed to fit almost anywhere, in any type of
system, in any type of environment. 
Available in a black or silver finish, the RCX-3
is a two-way magnetically shielded speaker
that employs a 3.5-inch aluminum woofer and
0.75-inch titanium-dome compression driver
coupled to an exclusive round MicroTractrix™
Horn for maximum clarity and efficiency. This
speaker also features high-quality network
components and premium internal wiring. 
The woofer is a long-throw unit driven by a
powerful magnetic motor structure. The
Cerametallic™ cone is lightweight with
excellent rigidity, which dramatically reduces
any resonance. As a result, the RCX-3 is
capable of robust bass extending low enough
for comfortable operation with today’s built-
in A/V preamp/processor and receiver
crossovers.
The RCX-3 has an integrated pedestal stand
with a ball joint that allows it to be adjusted in
almost any direction by using the provided
allen wrench. Keyhole points are featured on
the underside of the stand base for no-hassle
wall mounting. The speaker grille magnetically
snaps into place over the front baffle, while
sturdy five-way binding posts ensure simple
connection to any type of cable.
The RCX-3 is sold in a single box that includes
four RSX-3s and one RCX-3. This speaker
will also be available in a complete home
theater package called the Cinema 6. This
package includes four RSX-3s, one RCX-3 and
a Reference Series RW-8 subwoofer. 
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004