Panasonic SC-ZT1 Manuale Utente
RQT9471
19
For correct use of VIERA Link “HDAVI Control”
Use TV (VIERA)’s remote control to select “Home Cinema” without turning on
the main unit with this system’s power button (including the remote control).
(The main unit is automatically turned on.)
the main unit with this system’s power button (including the remote control).
(The main unit is automatically turned on.)
• See operating instructions of TV (VIERA) as well.
Using the VIERA Link “HDAVI Control™”
Play
HDMI cable notes
• Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
• When outputting 1080p signal, please use the HDMI cables 5.0 meters (16.4 feet) or less.
• It is recommended that you use Panasonic’s HDMI cables. (Non-HDMI-compliant cables cannot be utilized.)
Recommended part number: RP-CDHG10 (1.0 m / 3.3 ft.), RP-CDHG15 (1.5 m / 4.9 ft.), RP-CDHG20 (2.0 m / 6.6 ft.),
• Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
• When outputting 1080p signal, please use the HDMI cables 5.0 meters (16.4 feet) or less.
• It is recommended that you use Panasonic’s HDMI cables. (Non-HDMI-compliant cables cannot be utilized.)
Recommended part number: RP-CDHG10 (1.0 m / 3.3 ft.), RP-CDHG15 (1.5 m / 4.9 ft.), RP-CDHG20 (2.0 m / 6.6 ft.),
RP-CDHG30 (3.0 m / 9.8 ft.), RP-CDHG50 (5.0 m / 16.4 ft.), etc.
Note
• Only with HDMI cable connection, you cannot enjoy TV (VIERA) sounds on this system. Connect TV (VIERA) to this system
with the optical fiber cable (or stereo connection cable) to enjoy TV (VIERA) sound.
• See the operating instructions for the TV (VIERA) for VIERA Link “HDAVI Control” operation of connected equipment.
Connect this system with VIERA Link “HDAVI Control” compatible TV (VIERA) and DIGA
Blu-ray Disc player/DVD recorder (DIGA) with an HDMI cable.
Blu-ray Disc player/DVD recorder (DIGA) with an HDMI cable.
Connection
Preparations: Check “VIERA Link “HDAVI Control” setting” (➜ page 23) of this system is “ON ”. Make the
setting to activate VIERA Link “HDAVI Control” function in the menu operation of TV (VIERA).
1. Turn on all equipment other than the TV.
2. Turn on the TV (VIERA).
3. Switch TV (VIERA) input to the HDMI terminal that this system is connected to.
4. Ensure that pictures from the Blu-ray Disc player/DVD recorder (DIGA), etc. are shown correctly after
2. Turn on the TV (VIERA).
3. Switch TV (VIERA) input to the HDMI terminal that this system is connected to.
4. Ensure that pictures from the Blu-ray Disc player/DVD recorder (DIGA), etc. are shown correctly after
this system’s input is switched to “BD/DVD ” or “AUX 1 ”.
Note
Make this setting in the following cases:
• when this system is connected for the first time after purchase
• when adding or reconnecting equipment
• when changing the settings for “Reducing standby power consumption (In standby condition (HDMI off mode))” (
• when this system is connected for the first time after purchase
• when adding or reconnecting equipment
• when changing the settings for “Reducing standby power consumption (In standby condition (HDMI off mode))” (
➜ page 22)
and “VIERA Link “HDAVI Control” setting” (
➜ page 23)
Setup
Set “VIERA Link “HDAVI Control” setting” to “
OFF ”. (➜ page 23)
When not using this function
Blu-ray Disc
player/DVD
recorder (DIGA)
Main unit
TV (VIERA)
Make sure to connect
to
to
TV OUT
.
Digital audio
out (optical)
out (optical)
HDMI input
HDMI
Video/Audio
OUT
HDMI
Video/Audio
OUT
VIERA Link
“HDAVI Control”
compatible
equipment
5%<622
436;'PKPFF
5%<622
436;'PKPFF
ඦ೨
ඦ೨