Eizo L778 Manuale Utente
Signal Cable (FD-C39 enclosed)
Video Output Connector/ DVI
Input Connector (monitor) / DVI
Input Connector (monitor) / DVI
●
Digital graphics board
●
Power Mac G4/G5 (DVI)
●
The monitor is not compatible with a Power Mac G4/G5 ADC (Apple Display Connector).
2. Plug the power cord into the power connector on the rear of the monitor. Then, plug
the other end of the cord into a power outlet.
the other end of the cord into a power outlet.
Use the enclosed power cord and connect to the standard power outlet of your
country.
country.
Be sure to remain within the rated voltage of the power cord.Not doing so may
result in fire or electric shock.
result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.
3. Adjust the "height", "front and back position" and "angle" of the monitor.
Grip both side of the center part of the monitor and move slowly (refer to
the right figure.)
the right figure.)
(1) Adjust the height of the monitor. To heighten, push the monitor
backward. To lower, pull the monitor forward.
backward. To lower, pull the monitor forward.
(2) Adjust the position and angle of the monitor.
(3) If necessary, fine adjust the height of the monitor.
4. Turn on the monitor's Power button and then turn on the PC's power.
The monitor's power indicator will light up (blue).
If an image does not appear, refer to the
If an image does not appear, refer to the
for advice.
Whenever finished, turn off the PC and the monitor.
●
When turning on the monitor, the kind of the input signal (Signal 1 or 2/Analog or Digital) is