Sonance BPS-1 Manuale Utente

Architectural Series

™

BPS-1 I

-C

E I L I N G

U B W O O F E R

N S T A L L A T I O N

A N U A L

Connecting the Vent Tube and Adaptor Baffle

1. Use a Phillips screwdriver to remove the four screws that attach the paint shield to the Architectural

Series Panel Bracket (see

Figure 7).

2. Feed several inches of the Vent Tube through the Panel Bracket’s speaker opening (see

Figure 8).

3. Fit the Vent Tube Clamp (included with the Adaptor Baf fle) loosely around the vent tube (see

Figure 9).

4. Inser t the Adaptor Baf fle’s neck into the Vent Tube opening (see

Figure 10).

Insert Adaptor
Bafﬂe Neck
Into Vent Tube

Fit Clamp
Onto
Vent Tube

Figure 9: Fit the Clamp Onto the Vent Tube

Figure 10: Fit the Adaptor Baffle Neck Into the Vent Tube

Page 4 of 8

B6R

Sonance Architectural Series

5/8”

DRYWALL

WWW.SONANCE.COM
800.582.7777

Remove

Screws

Figure 7: Remove Panel Bracket

Paint Shield

Figure 8: Pull End of Vent Tube

Through Opening in Panel Bracket