Sony Bznp-D1 Manuale Utente
Sony NSP-1 / BZNP-D1 Tutorials
- 7 -
Confirm firmware version of NSP1
Click “System Settings”
Check the Software Version
If the Software Version is lower than 2.10, please
update NSP1 referring to a release note at
If the Software Version is lower than 2.10, please
update NSP1 referring to a release note at
www.sony.com/nsp1
,
Set Date and Time
1. Set Date and Time
7
2. Click Send
Set Display resolution and orientation
1. Set Display settings
Select resolution from VGA, WVGA, SVGA,
XGA and composite
Select resolution from VGA, WVGA, SVGA,
XGA and composite
8
. WVGA (848x480) is
recommended to drive a plasma display because
of square pixel ratio makes it easy to produce
content.
Select Orientation from Landscape or Portrait
2. Click Send
of square pixel ratio makes it easy to produce
content.
Select Orientation from Landscape or Portrait
2. Click Send
Reboot NSP1
1. Click Reboot
2. Click Reboot
2. Click Reboot
7
Time Zone does matter only when NTP is utilized to adjust date and time automatically over network. Currently
NSP1 doesn’t support “Daylight Saving Time”. Followings are for normal time. -5 (EST). -6 (CST), -8 (PST).
8
There is no simultaneous video output on “Composite video signal” and “Analog RGB - VGA (HD15) signal
”