JVC RX-7000VBK Manuale Utente
47
To change the transmittable signals for
operating a CATV converter
operating a CATV converter
1. Set the remote control mode to “CATV/DBS.”
2. Press and hold CATV/DBS POWER.
3. Press TV/DBS.
4. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
Examples: For an RCA product, press 1, 9.
For a SONY product, press 2, 0.
5. Release CATV/DBS POWER.
After setting the remote control mode selector to “CATV/DBS,”
you can perform the following operations on the CATV
convertor :
you can perform the following operations on the CATV
convertor :
CATV/DBS POWER
Turns on and off the CATV converter.
CHANNEL +/–
Changes the channels.
1 – 10, 0, 100+ (+10)
Selects the channels.
The 100+ (+10) button will function as
the ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
The 100+ (+10) button will function as
the ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
Note:
Refer to the manual supplied with your CATV converter.
6. Try to operate your CATV converter by pressing
CATV/DBS POWER.
When your CATV converter turns on or off, you have entered
the correct code.
If there are more than one code listed for your brand of
CATV converter , try each one until the correct one is entered.
the correct code.
If there are more than one code listed for your brand of
CATV converter , try each one until the correct one is entered.
Manufacturer
Codes
ECHOSTAR
21
GI JERROLD
01, 02, 03, 04, 05,
06, 07, 08
HAMLIN/REGAL
15, 16, 17, 18
PIONEER
13, 14
RCA
19
SCIENTIFIC ATLANTA
09, 10
SONY
20
ZENITH
11, 12
To change the transmittable signals for
operating another manufacturer’s VCR
operating another manufacturer’s VCR
1. Set the remote control mode to “AUDIO/TV/
VCR.”
2. Press and hold VCR POWER.
3. Press VCR.
4. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
Examples: For a JVC product, press 0, 1.
For an NEC product, press 2, 5.
5. Release VCR POWER.
The following button can be used for operating the VCR (with
the remote control mode selector set to “AUDIO/TV/VCR”):
the remote control mode selector set to “AUDIO/TV/VCR”):
VCR POWER
Turns on and off the VCR.
After pressing VCR or VCR CONTROL (with the remote
control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the VCR:
control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the VCR:
CHANNEL +/–
Changes the TV channels on the VCR.
1 – 10, 0, 100+ (+10)
Selects the TV channels.
The 100+ (+10) button will function
as the ENTER button if your VCR
requires pressing ENTER after
selecting a channel number.
requires pressing ENTER after
selecting a channel number.
PLAY
Starts playback.
1
Rewinds a video tape.
¡
Fast winds a video tape.
STOP
Stops operation.
PAUSE
Pauses.
¶
REC
:
Starts recording or enters recording pause.
Notes:
• Refer to the manual supplied with your VCR.
• You can use either VCR button or the VCR CONTROL button to
• You can use either VCR button or the VCR CONTROL button to
activate the buttons listed above. If you press VCR, the playing
source also changes. On the other hand, if you press VCR
CONTROL, the playing source does not change.
source also changes. On the other hand, if you press VCR
CONTROL, the playing source does not change.
6. Try to operate your VCR by pressing VCR
POWER.
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
Manufacturer
Codes
Manufacturer
Codes
JVC
01, 02, 03
PHILIPS
09
EMERSON
11, 26
RCA
05, 06
FISHER
29
SAMSUNG
24
FUNAI
10, 14, 15, 16
SANYO
21, 22, 23
GOLD STAR
12
SHARP
27, 28
HITACHI
04
SHINTOM
30
MITSUBISHI
13
SONY
18, 19, 20
NEC
25
ZENITH
08
PANASONIC
07, 17
Manufacturers’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
are changed, this remote control cannot operate the equipment.
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
notice. If they are changed, this remote control cannot
operate the equipment.
EN41_50.RX-7000V[J]/f
00.1.12, 0:01 PM
47