JVC FS-SD1000 Manuale Utente

• If you are having a problem with your System, check this 

list for a possible solution before calling for service.

• If you cannot solve the problem from the hints given 

here, or the System has been physically damaged, call a 
qualified person, such as your dealer, for service.

No sound is heard.

• Connections are incorrect, or loose.

• Headphones are connected.

• Check all connections and make cor-

rections. (See pages 4 to 8.)

• Disconnect the headphones.

Poor radio reception

• The antenna is disconnected.
• The AM Loop Antenna is too close 

to the System.

• The FM Wire Antenna is not prop-

erly extended and positioned.

• Reconnect the antenna securely.
• Change the position and direction of 

the AM Loop Antenna.

• Extend FM Wire Antenna to the best 

reception position.

The CD skips.

The CD is dirty or scratched.

Clean or replace the CD.

The CD does not play.

The CD is upside down.

Put the CD in with the label side up.

Unable to operate the Remote Control.

• The path between the Remote Con-

trol and the sensor on the Unit is 
blocked.

• The batteries have lost their charge.

• Remove the obstruction.

• Replace the batteries.

Operations are disabled.

The built-in microprocessor has mal-
functioned due to external electrical in-
terference.

Unplug the System then plug it back in.

NO DISC appears.

There is no disc in the tray, or CD, CD-R
or CD-RW that hasn’t yet been finalized
(including blank discs) has been inserted.

Insert a CD, CD-R or CD-RW that has
been finalized.

Subwoofer automatically turns on, but
no sound is output.

The volume knob of the Subwoofer is
set to MIN position.

Adjust the volume knob.

Subwoofer does not automatically turn
on.

The volume knob of the Subwoofer is
set to MIN position. Also, the volume
level of the Unit is low.

Adjust both volume levels.

FS-SD5_E3.fm  Page 22  Wednesday, February 14, 2001  2:02 PM