Pioneer DEH-P9300 Manuale Utente
15
Built-in CD Player
D
isplay and indicators
FORM 1
FORM 2
q
Source name
w
Track number
e
Disc title
r
Play time
t
Track title
B
asic operation
The built-in CD player plays one standard 12
cm or 8 cm (single) CD at a time. Do not use an
adapter when playing an 8 cm CD.
cm or 8 cm (single) CD at a time. Do not use an
adapter when playing an 8 cm CD.
1. Press EJECT to open the front panel.
2. Insert a CD into the CD loading slot.
When a CD is inserted, the front panel clos-
es automatically.
es automatically.
3. Press VOLUME to extend the VOLUME
outward.
• When you press VOLUME, it extends out-
ward so that it becomes easier to turn. To
retract VOLUME, press it again.
retract VOLUME, press it again.
4. Turn VOLUME to adjust the volume.
5. Press
2
2
or
3
3
to select a track.
Pressing
3
skips to the start of the next
track.
Pressing
Pressing
2
once skips to the start of the cur-
rent track. Pressing again will skip to the
previous track.
• If you press and hold
previous track.
• If you press and hold
2
or
3
, you can per-
form fast forward or reverse.
6. Press EJECT to eject the CD.
The front panel opens and the CD is ejected.
• Be sure to close the front panel by press-
• Be sure to close the front panel by press-
ing EJECT after removing the CD.
WARNING:
• Do not use with the front panel left open. If the
front panel is left open, it may result in injury
in the event of an accident.
in the event of an accident.
Note:
• You can select CD as the source by pressing
• You can select CD as the source by pressing
SOURCE when a disc is loaded in this product.
• When the front panel is open, multi-function but-
tons are not available.
• Do not insert anything other than a CD into the CD
loading slot.
• A CD left partially inserted after ejection may incur
damage or fall out.
• If a CD cannot be inserted fully or playback fails,
make sure the recorded side is down. Press the
EJECT and check the disc for damage before rein-
serting it.
EJECT and check the disc for damage before rein-
serting it.
• If the built-in CD player cannot operate properly, an
error message (such as “ERROR-14”) appears on
the display. Refer to “Understanding built-in CD
player error messages” on page 49.
the display. Refer to “Understanding built-in CD
player error messages” on page 49.
• You can eject the CD by pressing and holding
EJECT with opening the front panel when the CD
loading or ejecting cannot operate properly.
loading or ejecting cannot operate properly.
e
t
q
w
r
e
r
q
w