Pioneer HTZ-55DV Manuale Utente
19
En
3 Getting Started
Switching between digital and analog sources
Both digital and analog inputs are available when Audio 1 or Video 2 is selected as the
source. The Input Select setting tells the system which input it should use.
source. The Input Select setting tells the system which input it should use.
See page 54 for more on connecting other components to this system.
Note: This system can only play Dolby Digital, PCM (32, 44.1, and 48kHz) and DTS
digital audio formats. For digital sources using other formats, use analog connections
and select
digital audio formats. For digital sources using other formats, use analog connections
and select
INPUT
ANALOG
.
1
Press AUDIO A-1 or VIDEO V-2 (for the input you want to set).
The settings for the Audio 1 and Video 2 inputs are completely independent.
The settings for the Audio 1 and Video 2 inputs are completely independent.
2
Press SYS then SETUP.
3
Press the
@ or # button until you see INPUT in the display.
4
Use the
% and fi buttons to select the input to use.
•
INPUT
OPTICAL
– the optical digital input is used as the source
•
INPUT
COAXIAL
– the coaxial digital input is used as the source (this setting is
only available for VIDEO 2)
•
INPUT
ANALOG
– (default setting) the analog inputs are used as the source
5
Press ENTER to make the setting.
Listening to other components
This system has several audio/video inputs for you to connect other components, such
as a VCR, MD deck, and so on. See chapter 12 for more on connecting up other
components.
as a VCR, MD deck, and so on. See chapter 12 for more on connecting up other
components.
1
Switch to the source you want to watch/listen to.
There are four external inputs you can connect components to. Select them using the
multi-control buttons:
There are four external inputs you can connect components to. Select them using the
multi-control buttons:
•
V-1 (Video 1)
•
V-2 (Video 2)
•
A-1 (Audio 1)
•
A-2 (Audio 2)
Alternatively, you can use the
FUNCTION
button on the front panel, or press
SYS
then
FUNCTION
on the remote.
2
Start playing the source component.