Pioneer HTZ-55DV Manuale Utente
46
En
11 Controlling Other Equipment
Controlling a component while playing
another
another
This feature allows you to keep the system in one function (for example, CD) while
putting the remote control in a different one (Video 1, for example). This may be useful
if you were listening to a CD and wanted to rewind a video tape, for example.
putting the remote control in a different one (Video 1, for example). This may be useful
if you were listening to a CD and wanted to rewind a video tape, for example.
1
Press SHIFT, then press the MULTI CONTROL button for the
component you want to
control.
The system remains in the same function, but the remote is in a different one.
component you want to
control.
The system remains in the same function, but the remote is in a different one.
2
To switch back to the original function, press the MULTI
CONTROL for the current system function.
CONTROL for the current system function.
It’s also possible to set up the remote so that a particular multi control button always
only switches the remote control mode and not the system function.
only switches the remote control mode and not the system function.
1
Press and hold REMOTE SETUP for three seconds.
The LED at the top of the remote blinks twice.
The LED at the top of the remote blinks twice.
2
Press the MULTI CONTROL button you want to set up.
3
Use the number buttons to enter 983.
The LED on the top of the remote blinks twice. Now, when you press that
The LED on the top of the remote blinks twice. Now, when you press that
MULTI
CONTROL
button, only the remote mode changes.
• To change the button back, repeat the above, entering
982 in step 3.
Deleting a single command
1
Press and hold REMOTE SETUP for three seconds.
2
Press the MULTI CONTROL button related to the command you
want to delete.
For example, press
want to delete.
For example, press
VIDEO
V
-
1
if the command you want to delete is one for a VCR
connected to the Video 1 inputs.
3
Use the number buttons to enter 976.
4
Press the same MULTI CONTROL button again.
In the above example, press
In the above example, press
VIDEO
V
-
1
again.
5
Press twice the command button you want to delete.
Deleting all commands for a component
1
Press and hold REMOTE SETUP for three seconds.
2
Press the MULTI CONTROL button related to the commands you
want to delete.
For example, press
want to delete.
For example, press
VIDEO
V
-
1
if the commands you want to delete are for a VCR
connected to the Video 1 inputs.
3
Use the number buttons to enter 976.
4
Press the same MULTI CONTROL button twice more.
In the above example, press
In the above example, press
VIDEO
V
-
1
twice.