Panasonic SB-AK770 Manuale Utente

RQT8043

RQTV0286

■  Using the USB device 

¶ REC, TAPE] button is 

•  Disconnect the USB device and then reconnect it back. Alternatively, turn the unit off and 

then back on.

—

•  Select a suitable recording mode (128 KBPS or 192 KBPS) and resume recording.

19

•  The USB drive format or its contents is/are not compatible with the system, “NO PLAY” is 

displayed. Unplug the USB device and insert it again.

  Alternatively, format the USB device and record the desired tracks again and playback the 

device.

•  The USB host function of this product may not work with some USB devices.
•  USB devices with storage capacity of more than 8 gigabytes may not work in some 

instances.

17

19

—
—

•  Large fi le size or high memory USB fl ash drive takes longer time to read.

—

•  The USB device is drawing too much power. Disconnect the USB device. Turn the unit off 

and then back on.

—

•  You cannot use high-speed recording while using analogue mode. Change to digital mode 

or use normal recording.

—

•  You cannot perform a second high-speed recording. You have to wait until the displayed 

“XX” minutes have lapsed prior to performing the next high-speed recording.

18

•  You cannot perform high-speed recording because the total USB remaining REC 

(recording) time of the USB device is less than the total time of the music source.

  Change to a USB device which has the appropriate recording time and perform the high-

speed recording again.

18

■ Disc trays

• Press [

y/I] to release the jammed tray(s) as the unit will switch off. Turn it on again and the 

tray(s) will initialise to the previous tray(s) condition.

•  If this still does not fi x the problem, please consult the dealer.

—

—

RQTV0286-2B.indd   21

RQTV0286-2B.indd   21

5/21/08   10:17:42 AM

5/21/08   10:17:42 AM