Philips MCD280/30 Dépliant
Detailed playback features and additional functions are described in the
accompanying ower’s manual
Make sure your DVD system and TV are connected
and turned on!
and turned on!
Playing a disc
1
Press DISC on the remote control.
You can also press SOURCE on the front panel to select DISC.
2
Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD
system).
3
Press OPEN
0
CLOSE
0 on the top of the DVD system and load a disc, then press
OPEN
0
CLOSE
0 again to close the disc compartment.
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face
up.
4
Playback will start automatically.
If a disc menu appears, use
If a disc menu appears, use
22/33
/3/4 buttons on the remote to make the necessary
selection, then press OK to confirm. Or, use the numeric keypad on the remote to select
features. Follow the instructions given in the disc menu.
features. Follow the instructions given in the disc menu.
5
To stop playback, press STOP 9.
Region Codes
DVDs must be labeled for ALL regions or Region 3,
in order to play on this DVD system.
in order to play on this DVD system.
ALL
ALL
3
You should find the below accessories in the packaging box.
Audio cables
(white, red)
component video
cables (red, blue, green)
MW loop
antenna
Composite video cable
(yellow)
AA size
batteries
batteries
Plug adapter (not
for all versions )
FM wire
antenna