Samson A8 Manuale Utente
1. HIGH FREquENCy LEvEL – Four-position
switch used to adjust the high frequency
response (in 3dB increments).
response (in 3dB increments).
2. vOLuME - Controls the amount of output level.
3. XLR INPuT (A6 AND A8 ONLy) - Balanced,
+4dBu line level input is connected here via
standard XLR (microphone) cable.
standard XLR (microphone) cable.
4. POWER SWITCH – Main power switch.
Resolv A Series Layout
Rear Panel Layout - A8a
5. vOLTAGE SWITCH – Used to select the
operating voltage.
NOTE: Be sure to check the voltage setting is
correct for your country. Also, be sure to use the
correct fuse type when changing the voltage.
correct for your country. Also, be sure to use the
correct fuse type when changing the voltage.
6. AC INLET - Connect the supplied IEC power
cable here.
7. RCA – Used to connect signals from unbalanced,
–10dBV devices.
8. 1/4-INCH PHONE – Balance TRS (Tip, Ring,
Sleeve) 1/4-inch phone plug used to connect
balanced or unbalanced +4dBu line level signals.
balanced or unbalanced +4dBu line level signals.
6
8
5