Toshiba RD-XS32SC Manuale Utente

You can select from 5 combined picture and sound
quality recording settings prior to actual recording.
Actual selection applied becomes the default setting for
the normal recording or programmed recording.

1) Press the   /   /   /   buttons to select the

desired item (“Mode”, “Rate”, or “Audio quality”).

2) Press the ADJUST button to change the setting

of each item.

1) Press the   /   /   /   buttons to select a media

to record on (HDD or DVD).

2) Press the ADJUST button to change the

setting.

You can confirm the available recording time for
the selected setting on the bottom screen.

3) Press the ENTER button.

Notes
• A combination of picture and sound quality settings can be

set for HDD and DVD-RAM respectively.

• You can change the combination of picture and sound

quality settings also by displaying the Quick Menu on a
LIBRARY MENU or during stop mode, then selecting “AV
Record Quality”. Either of the above methods updates the
setting of this recorder.

• If you set “SP” or “LP”, you cannot select “L-PCM”.
• Depending on the sound quality settings, the upper limit for

the picture quality setting differs.

• You can adjust the manual rate for picture quality by

0.2 Mbps from 2.0 to 9.2. (You cannot set the rate from 1.4
to 2.0.)

Adjusts problems with the brightness of video signals of
TV broadcasts or other external input.

Press the   /   buttons to select the source, and the   / 
buttons to select the mode.

(Only use this setting when you cannot adjust the
brightness satisfactorily with the Custom picture setting in
the Picture/Audio settings (

 Page 157) of this

recorder.)

Important:
• This setting changes the video signal to record and the

recorded signal is not returned to the original state even
when this setting is changed after recording. When
duplicating from VHS tape, if you can check the video
recording state beforehand, we recommend first playing
back for a while and checking the overall brightness
tendency, then setting an appropriate mode.

The brightness of signals received with this recorder
and external input signals is adjusted automatically.
This is normally the setting to use.

This setting is used to record the signals darker when
the screen is too bright.

As the number rises, the signals are recorded brighter.
Use these modes to adjust the brightness.

Sets the audio input level of recorded sound.
Press the   /   buttons to select the desired item, and
then press the   /   buttons to adjust the input level.

Sets the input level for the left channel.

Sets the input level for the right channel.

Sets the input level for the left channel of the external
input connectors.

Sets the input level for the right channel of the external
input connectors.

e.g.