Vector F-5 US Dépliant

Pagina di 2
Using  the  supplied  wall  mounting  pattern  for  correct  positioning,  drive  two  wood  screws
or  anchor  bolts  into  the  wall  surface  to  a  head  height  of  less  than  0.3"  (8mm).  Then  insert
two  fixing  holes  on  the  speaker's  rear  cover  onto  the  screws  or  anchor  bolts  for  mounting.
(The  pattern  is  printed  on  a  flap  of  the  carton  box  containing  this  speaker.)
Wall
Less
than
0.3"
(8mm)
3"  (76mm)
Less than  0.3"  (8mm)
Precaution 
The  speaker  weighs
3.5  Ibs  (1.6  kg).  When  there  is  a
danger  that  the  speaker  falls,
reinforce  the  wall  strength  with
anchor  bolts,  etc.
The  F-5  is  factory-preset  to  10  watts  (490  ohms).  Follow  the  instructions  below  to  change
the  wattage.
Remove  four  screws  on  the  rear  and  detach  a  baffle  board  from  an  enclosure.
Change  the  connection  of  a  red  input  lead  from  the  prewired  tap  to  that  of  desired  im-
pedance  (wattage).  In  this  event,  tighten  the  connection.
To  speaker  unit  (Red  and  black)
Red lead
Black  lead
From  input  terminal
Do  not  change  the  connection
of  black  lead.
Impedance
Wattage
490  ohms
10W
980  ohms
5W
(The  sound  pressure  level  of  siren  sound  is  90  dB/m  or  more  for  any  im-
pedance.)
For  low  impedance  applications,  remove  a  red  lead  and  a  black  lead
connecting  between  the  matching  transformer  and  speaker  unit.  Then
connect  both  leads  from  the  input  terminal  directly  to  the  speaker  unit.
(Connect  the  red  lead  to  " + "  terminal  of  the  speaker  unit.)
Type:
Rated input
power:
Nominal
impedance:
Output sound
pressure level:
Frequency
response:
Speaker:
Ambient
temperature:
Material:
Dimensions:
Weight:
Bass  reflex  type
10 watts
490 ohms  (10 watts)
980 ohms  (5  watts)
88  dB/W/m
100 -  18000 Hz
4"  (10  cm)  dynamic  speaker
–4°Fto  +131°F
(–20°C to +55°C)
Polypropylene
7.76(W)×5.43(H)×5.98(D) inches
197(W)×138(H)×152(D)  mm
3.5  Ibs
1.6  kg
When  not  using  matching  trans
Handling
capacity:
Impedance:
10W  (continuous  pink  noise)
30W (continuous  program)
8 ohms
Characteristic  Diagram
(1W/1m  in  anechoic  chamber,  1/3  octave  pink  noise)
Toa Electric Co., Ltd.
KOBE, JAPAN
1 3 3 - 0 1 - 2 7 9 - 6 0
Installation
Changing the wattage
(impedance)
Specifications