Philips MC-220 Manuale Utente
19
English
3140 115 30141
Clock/Timer
SIDE A/B
CLOCK
TIMER
ON
OFF
PREV
NEXT
STOP
iR
PLAY•PAUSE
RECORD
SOURCE
SELECT
SELECT
SHUFFLE
STANDBY-ON
PROGRAM
REPEAT
REV
MODE
BAND
Setting the clock
1
In standby, press
CLOCK.
➜ The clock digits for the hours flash.
2
Turn
VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
3
Press
CLOCK again.
➜ The clock digits for the minutes flash.
4
Turn
VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
5
Press
CLOCK to confirm the time.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
at a set time. The clock time needs to be set first
before the timer can be used.
● You can also use it to record a favourite tuner
programme at a set period (see “Recording
timer”)
timer”)
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
automatically.
1
In any mode, press
TIMER ON•OFF for more
than 2 seconds.
2
Turn
VOLUME clockwise to select sound
source.
➜ Display sequence shows CD, TUNER, TAPE or
➜ Display sequence shows CD, TUNER, TAPE or
REC TUNER.
3
Press
TIMER ON•OFF to confirm your
desired mode.
➜ The selected source
CD
or
TUNER
TUNER
is shown. Display sequence scrolls
SET ON
TIME and
TIMER
flashes. The clock digits for the
hours flash.
4
Turn
VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
5
Press
TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
6
Turn
VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
7
Press
TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
TIMER
● In standby or during playback, press
TIMER ON•OFF once.
➜ Display shows
➜ Display shows
TIMER
if activated, and
disappears if deactivated.
Activating and deactivating
SLEEP
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
● Press SLEEP on the remote
control once or more.
➜ Display shows SLEEP
and one of the sleep time
options in sequence:
➜ Display shows SLEEP
and one of the sleep time
options in sequence:
60, 45,
30,15, SLEEP OFF, 60... if
you have selected a time. Once SLEEP is
activated,
you have selected a time. Once SLEEP is
activated,
SLEEP ON scrolls across the display at
repeated intervals.
● To deactivate, press SLEEP on the remote
control once or more until
SLEEP OFF is
shown, or press
STANDBY ON on the system
or remote control.
➜ SLEEP OFF scrolls across the display.
➜ SLEEP OFF scrolls across the display.
UFFLE
SLEEP