BreatheAudio BA-650-OB Manuale Utente

Congratulations on your purchase of the BreatheAudio Resonate Outdoor Speakers. A durable mineral filled, UV -resistant cabinet and powder-coated 

aluminum grill are able to withstand the elements and through careful design, are capable of superior audio reproduction. The secret is in a honeycomb 

pattern molded into the enclosure that provides important rigidity and high quality 12dB crossover that greatly enhances the audio output of the speakers. The 

result is greatly increased  bass and treble response that will heighten any listening experience. 

Proper placement of the speakers is crucial to enjoying the benefits of the Resonate Outdoor Speakers. Consider the optimal listening area. The speakers 

should ideally be placed facing that area with 8 - 10 feet of separation or if you are using the stereo speakers try to center it within the space. The on-wall 

bracket provided with the speakers allows them to be angled ideally at the ear level of the listener.

Each speaker is shipped with two types of mounts. One is a tripod that allows 

each speaker to sit on a tabletop or shelf. The other is a U-shaped bracket that 
is designed for mounting the speakers on a wall.

To use the included tabletop mount, locate the bottom of the speaker. This is 

the inset mounting screw with a small hole positioned next to it. This is 

designed to receive the small peg molded on the top of the tripod. The speaker 

and the tripod also have corresponding bevels that interlock. Line up the peg 

with the hole and the interlocking bevels on both the stand and speaker and 

secure the stand to the speaker with the included end cap, fig. 1. Once secured 

the speaker will stand upright on any level surface.

A U-shaped bracket is shipped with each speaker designed for mounting the 

speaker horizontally on a wall. The beveled surfaces on the inside of the mount 

and on the exterior ends of the speaker allow the speaker to be tightened and 

angled appropriately toward the listening area. The end caps provided with the 

speakers tighten the bracket to the speaker enclosure to hold the speaker at 

the desired angle, fig. 2.