Dynaudio Focus loudspeakers Manuale Utente

The moving parts of a newly manufactured Focus loudspeaker have been acoustically 
checked after production, but nevertheless are not as flexible as they need to be for 
optimum results to be realized. The higher the quality of any driver system, the more 
demanding the loudspeaker will be regarding time for running-in the system. 
A newly unpacked Dynaudio loudspeaker therefore requires several weeks running/
playing to reach its optimum performance capability. After that period, a couple of minutes 
before every listening session will be helpful to “warm up” the loudspeakers.

Due to the construction and the driver technology the Focus loudspeakers can be driven 
with very high power levels. With a high quality amplifier, delivering undistorted signals, 
the speaker can achieve high volumes without any compromises in sound quality.
Also, as the Focus models are easy to drive, even high quality amps with lower power 
rating can drive the loudspeaker to yield excellent results.
Attention must be given to amplifiers with very low power and adjustable tone controls or 
switches. These types may soon overreach their own performance limits and may send 
distorted output signals to the speakers, compromising even high quality technology. Any 
damage caused under such circumstances is not covered by the Dynaudio warranty and 
is easily avoided in the first place by consulting your Dynaudio dealer for advice regarding 
the choice of amplifier.

Distorted output signals from too weak, defective or overloaded amplifiers may damage 
the loudspeakers.
X Use high quality amplifiers only and run loudspeakers and amplifiers within specified 

power ratings.

www.fshifi.cn